Beretta 20141085, Installation Manual

Page: 78 / 112

78
3.12 Cleaning and removing internal
components
Before any cleaning operation, disconnect the electric power supply
by switching the main system switch to "off”.
OUTSIDE
Clean the casing, the control panel, the painted parts and plastic
parts with cloths moistened with soap and water. In the case of stub-
born stains, moisten the cloth with a 50% water and alcohol mixture
or specific products.
a
Do not use fuels, sponges impregnated with abrasive solutions
or powder detergents.
INSIDE
Before starting internal cleaning operations:
- close the gas shut-off valves
- close the system taps.
Access to the control panel and the internal modular system
parts
- open the module door (or the left door if two doors are present).
- Unscrew the two screws (1) placed on the panel.
- Fold the panel forward (2) making it rest on the two rubber
pads. At this point you have full access to the terminal blocks
(3).
1
2
3
3
Once the maintenance operations are complete, refit the compo-
nents working in the opposite direction of what was described.