Hook-up and un-hook accessory
11
I.
Secure the front subframe in place with the pin (item
4) and the lynch pin (item 5). Remove the wooden
block.
J.
Unite the driveline shaft to the mid P.T.O. with the
quick attach (item 1).
Finalization of hooking Option A: with
snowblower installation
K.
Hook the snowblower on the subframe (see sub-
section for hooking the snowblower in the hook and
un-hook section).
L.
Start the vehicle engine, raise the accessory, this
raises the rear of the subframe.
M.
Stop the vehicle,
see the procedure for stopping the
vehicle in the operation section
.
N.
Secure the subframe (item 1) to the vehicle with the
pin (item 2) and secure in place using the lynch pin
(item 3).
Finalization of hooking Option B: without
accessory
K.
Raise the lift arms (item 2)
L.
Stop the vehicle,
see the procedure for stopping the
vehicle in the operation section
.
M.
Lift the rear of the subframe (item 1) with a metal bar
in the hole (item 4) or use a jack.
N.
Secure the subframe (item 1) to the vehicle with the
pin (item 2) and secure in place using the lynch pin
(item 3).