Assembly & initial configuration
6
Assembly & initial configuration
Tractor requirements
The subframe and brackets kit are designed to be
installed on a TYM T394 tractor only and to be used with
approved accessories only.
The front loader must be removed.
WARNING
To avoid serious injury or death caused by vehicle
overturn:
Operate only with tractor equipped with an approved
rollover-protective structure (ROPS) or ROPS cab and
seat belt. Foldable ROPS must be kept up at all times.
Fasten seatbelt snugly and securely.
Reception
CAUTION
To avoid serious injury :
Keep Clear. The accessory can flip forward or backward
suddenly causing serious injury while removing the
accessory from packaging.
1.
Remove the protective cover from the wooden box.
2.
Disassemble the wooden box.
3.
Unbolt the accessory and remove it from the crate
using a suitable lifting system.
4.
Remove other components from the crate.
General assembly instructions
•
Unless otherwise specified, torque all bolts to
“torque specification table” (see
table of content for
page number)
•
Refer to parts breakdown section for part
identification.
Note : To allow the proper use of the different options
available on the different vehicles, it is possible that this
set of brackets must be removed from the vehicle in
order to prevent interference that could occur in the
different movements, such as a mower or other options.