Installing the device
39
¾
Insert the fluff screen into the device.
Installing the lower grease tray
¾
Grip the grease tray using both hands.
¾
Insert the lower edge of the grease tray into the
lower rounding of the flap.
¾
Make sure that the lower edge of the grease tray
is inserted completely into the flap's rounding.
¾
Secure the grease tray by pressing the grease
tray backwards into the flap.
¾
Make sure that the grease tray is inserted
correctly. The grease tray is inserted correctly
when the grease tray's magnetic brackets are
seated centrally in the holes and are flush with
these.
Closing the lower flap
¾
Close the flap by pressing it up until both retaining
magnets audibly make contact.
Installing the rotary knob
ATTENTION
Damage to the rotary knob in the case
of incorrect alignment.
¾
Turn the rotary knob to the correct
installation position.
The rotary knob must be placed onto an axle. This
round axle is milled at one edge. The rotary knob
can therefore only be placed onto the axle in one
position.
