Installing the device
29
¾
Use a drill with a HSS drill bit d = 9 mm to drill the
holes marked for the mountings (1.).
1.
Securing the mountings
A spanner, WAF 10 mm, is required for this step.
¾
Insert the mountings (1.).
¾
Insert two hexagon bolts M6 x 40 with an
appropriate washer (2.) per mounting.
¾
Tighten the hexagon bolts (3.).
1.
2.
3.
2.
3.
Adjusting the mountings
A spanner, WAF 10 mm, is required for this step.
