Preparing for installation
15
Removing the upper grease tray
The upper grease tray must be removed prior to
installation so that the mountings are accessible.
The upper grease tray is secured magnetically. The
upper grease tray can be removed without tools.
Proceed as follows to remove the upper grease
tray:
¾
Grip both of the grease tray knobs using both
hands.
¾
Release the grease tray by pulling it forwards.
¾
Remove the lower grease tray.
Removing the mountings
The mountings are installed in the device during
transportation. The mountings must be removed
prior to installation.
A large Phillips screwdriver is required for this step.
Proceed as follows to remove the mountings:
¾
Make sure that the rear side of the device is lying
on a protective surface.
¾
Position yourself in front of the device.
¾
Grip one mounting firmly.
¾
Unscrew the corresponding Phillips screw M8 (1.).
1
