Cleaning and care
17
Closing the lower flap
¾
Close the flap by pressing it up until both retaining
magnets audibly make contact.
Cleaning in the case of severe soiling
If the device is severely soiled, the grease trays
(including adapter parts if fitted) and the fluff screen
must be removed. These stainless steel parts are
held magnetically. The parts can be easily removed
and installed and can be reused after cleaning.
Proceed as follows to clean the device in the case
of severe soiling:
Removing the lower grease tray
¾
Switch the device off.
¾
Open the flap by pulling it downwards at the
rounded edge.
The flap is open.
Use a soft, moist cloth or paper for cleaning.
¾
Wipe the parts off.
¾
Grip behind the rear edge of the grease tray using
both hands.
¾
Release the grease tray by pulling it upwards.
¾
Remove the lower grease tray.
BLB 90 only: Removing lateral adapter parts for the
lower grease tray
Fan module BLB 90 is additionally equipped with
two lateral attaching parts on the lower grease tray.
The two lateral adapter parts and removed and
installed in the same manner as the lower grease
tray. The procedure is described in the previous
section.
¾
Remove the two adapter parts.
Removing the fluff screen
¾
Grip the fluff screen by the knob in the centre of
the screen.