75
Installation
EN
6002782_b – 14.09.2016
Two persons hold the hood body and a third person carries
out the following tasks:
☞
Guide the support cable’s mounting sleeves into the
appropriate threaded bolts on the ceiling mounting plate.
☞
Screw in the mounting sleeves until they stop on the
threaded bolts on the ceiling mounting plate.
☞
Ensure that all four support cables are tensioned.
The hood body can now hand freely on the support cables.
D
ATTENTION!
Danger of property damage due to improper hanging on
the cables.
The cable cannot be wound up correctly due to obstructions
or irregularities on the cable guide.
☞
Ensure that the device is hanging freely and straight on
the cables.
☞
Plug the Wieland plug into the Wieland socket.
☞
Place the cable anchor into the bracket on the ceiling
mounting plate
☞
Feed the mains cable with the Wieland plug tightly from
the device to the ceiling mounting plate.
☞
Feed the mains cable with the Wieland plug through the
cable anchor.
☞
Tighten the screws on the cable anchor.
☞
Connect the earthing cable.
Summary of Contents for BDL 115 SK
Page 92: ...6002782_b 14 09 2016 ...