77
Installation
EN
6002782_b – 14.09.2016
For ceiling consoles with lowering capability and glass cover:
y
The glass cover is placed loosely on the device.
y
The glass cover must be guided into the console box of
the ceiling console.
☞
Ensure that the support cable and the mains cable are not
tensioned (e.g. by lifting the device with two people).
☞
Turn one corner of the glass cover diagonally upwards.
☞
Guide the glass plate fully into the ceiling console.
☞
Lower the glass plate from above onto the seal.
☞
Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
☞
Push the cover (placed loosely on the hood body) over
the support cable and the ceiling mounting plate.
☞
Screw in the lock nuts.
☞
Tighten the lock nuts to hand-tight.
☞
Switch the electricity supply on.
The device is ready for operation.
Summary of Contents for BDL 115 SK
Page 92: ...6002782_b 14 09 2016 ...