Insert 2 pcs Weight Guide Rods (22) into the holes of the
Rear Stabilizer (2) and secure them with 1 x M10 x 25mm
Allen Bolt and 1 x Ø10mm Washer (44) for each Weight
Guide Rod.
Attach the Base Frame (1) to the Rear Stabilizer (2) as the
diagram shows and tighten them with 2pcs M10 x 70mm
Carriage Bolts (27), 1 x Rear U-Shaped Bracket (104), 2 x
Ø10mm Washers (44) and 2 x M10 Nylon Locknuts (46).
Do NOT FULLY TIGHTEN any Bolts,
Nuts or Fittings at this stage unless
specifically instructed to do so.
Carefully unpack each component, checking against the parts list that
you have all the necessary parts to complete the assembly of your
product.
Please note that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our
CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before
contacting us first.
Tel:-
0800 3 101 202
or
+44 (0)1535 637711
E-mail:- [email protected]
CUSTOMER SUPPORT open from 9.00am to 4.30pm from Monday
to Friday
Unit 8 Riparian Way,
The Crossings Business Park,
Cross Hills,
West Yorkshire.
BD20 7BW
37
1
2
22
22
104
27
27
44
44
44
46
Page
