A. Attach the Front Press Frame (15) to the Upper Frame (12) using 1 x Axle
(26), 2 x Ø25mm x 10mm ID washers (45) and 2 x M10 Nylon Locknuts (46).
B. Attach the 2 x Swivel Pulley Brackets (19) to the welded supports on the
rear of the Front Vertical Frame (3) using 1 x M10 x 65mm Allen Bolt (31),
2 x Ø10mm Washers (44) and 1 x M10 Nylon Locknut (46) for each side.
12
45
45
46
46
26
15
51
31
44
44
46
19
3
Fully tighten these fittings
and then back off 1/4 turn.
Page
