To fit all Cables to your Viper Home Gym please follow the text in conjunction
with the illustrations on Pages 24 - 28
A. Feed the threaded bolt end of the 3150mm long Upper Cable (94) through
the opening in the front of the Upper Frame (12). Position 1 x Pulley (79)
below the Cable and secure to the Upper Frame (12) using 1 x M10 x 45mm
Allen Bolt (35), 2 x Ø10mm Washers (44) and 1 x M10 Nylon Locknut (46).
B. Draw the Cable backwards placing a 2nd Pulley beneath and secure to the
next welded bracket using the same components as in A above.
C. Route the Cable around the 2nd Pulley towards the front of the Frame and
fit the 3rd Pulley using 1 x M10 x 140mm Allen Bolt (28), 2 x Ø10mm Washers
(44) and 1 x M10 Nylon Locknut (46).
D. Continue routing the Cable as per the illustration and fit the 4th Pulley to the
Frame using the same components as in A above.
E. Guide the Cable around and down, securing the 5th Pulley into the Double
Floating Pulley Bracket (23) with 1 x M10 x 50mm Allen Bolt (33), 2 x Ø10mm
Washers (44), 2 x Bushing (81), 2 x Cable Retainers (80) and 1 x M10 Nylon
Locknut (46).
F. Guide the Cable round the 5th Pulley and up towards the top of the Upper
Frame and fit the 6th Pulley to the Frame using 1 x M10 x 65mm Allen Bolt
(31), 2 x Ø22 x 13mm Bushing (47) and 1 x M10 Nylon Locknut (46).
G. Pull the Cable down towards the Selector Rod (17) and screw the threaded
bolt on the end of this Cable fully into the top of the Selector Rod.
Use the L-shaped Weight Plate Selector Pin (89) to adjust to your desired
exercise weight.
Page
