Bentone B 45i A2.2H J/K, Installation And Maintenance Instruction

Page: 60 / 108

60
Bentone
To the next
curvepoint
+
-
Back to the previous curvepoint
F
A
+
-
and
or
as well as
A
+
-
and
and
or
Curvepoint P2 can only be adjusted when symbol
▲
or
▼
is no
longer highlighted.
Fuel valve V2 is switched on. Keep
A
depressed and, for VSD
F A
and
. Press
+
-
or
to adjust the value.
When symbol
▲
or
▼
is no longer highlighted, the next
curvepoint P2of
can be selected with
-
-
Back to the previous curvepoint
Curvepoint P2of is now adjusted.
The system remains at P2 .
Adjust the switch-off point with no travel.
Now, the curvepoint is approached dynamically when traveling
from
P2 to P1 .
When symbol
▲
or
▼
is no longer highlighted, the next
curvepoint P1 can
be selected with
-
To the next
curvepoint
+
-
Back to the previous curvepoint
Automatic mode is released when, after reaching P1 , the curve
settings are quit with ESC .
If the settings are aborted earlier ( ESC or shutdown due to fault),
start prevention OFF UPr is still active until all curvepoints are set.
-
+
ESC
When symbol
▲
or
▼
is no longer highlighted, ESC can be
pressed a second time.
-
+
ESC
The warm settings for air-fuel ratio control of the LMV37.4... have now been configured.