Bentel Security B3G-220, Installation Manual

Page: 48 / 64

48 Universal Cellular Communicator
Telephone Numbers
: select the numbers to which the event is to send the digital message, when you have selected
Channel
Type
,
CID: Over GSM
.

When you select
Channel Type
,
CID/SIA: over Data Network
, the events are transmitted to the IP receivers indicated
in the
IP Receivers
page.
The phone numbers are those selected in the
Phone Number Use
table.
CID/SIA Converter
If the communicator detects that the panel connected to the
LI
terminals is dialing a number from the
Phonebook
with the option
CID/SIA Event Conversion
enabled, it converts the panel's Contact ID or SIA message into a voice or SMS message,
as indicated in this page.
Phone Number Use
This table specifies which numbers in the
Phonebook
are to be used for sending SMS (
SMS Phone Numbers
) and voice
messages (
Voice Dialer Phone Numbers
): you can choose up to 8 numbers for each option.
Events—Actions

Label
: this column lists the events for which a voice or SMS message is to be sent.

Contact ID Identifier
: set whether the event to be converted is an
Activation
or
Restore
; set the type of event
(e.g. 130 -
Burglary
); select the partition of the event; select the zone of the event.

This option is considered only if
Contact ID
has been selected as
Communication Protocol
in the
Options
page.

Event SIA Identifier
: enter the SIA event identifier to be converted.

This option is considered only if
SIA
has been selected as
Communication Protocol
in the
Options
page.

SMS Tel. Numbers
: select the numbers to which an SMS must be sent.

The phone numbers are those selected in the line
SMS Phone Numbers
.

SMS Text
: enter the message to be sent when the event occurs (up to 70 characters).

Voice Messages
: select the voice messages to be sent when the event occurs: you can select up to three voice messages
for each event (
First Message
,
Second Message
and
Third Message
); click on
[...]
to browse the list of messages; you
can select a pre-recorded message (see
Voice Messages
) or record a new one, or open a .wav file on the PC.

Telephone Numbers
: select the numbers to which the event is to send a voice message.

The phone numbers are those selected in the line
Voice Dialer Phone Numbers
.