Bentel Security B3G-220, Installation Manual

Page: 37 / 64

220 Series 37
Icons present on all programming pages.
Clear all tags for this group
.
Export
.
Restore all options to default
.
Restore all options to original
.
Tag all for upload
: select all page options for upload.
Tag all for download
: select all page options for download.
The following pages are available in the programming section.
Phonebook
: the phonebook page.
Options
: options page.
Firmware Update
: the icon only displays when the
Level 4 Installer
is enabled and is updating the firmware in this page
(see icon
Select User
).
Network Settings
: connection settings page
Inputs/Outputs
: programs the communicator's inputs and outputs.
Communicator
: communicator programming page.
IP Receivers
: programs all IP receiver options.
Voice Messages
: voice message management page.
PSTN/PTM
: configures the PTM function.
Event Log
: configures the event buffer.
Status
: communicator monitoring page.
If you wish to configure a new account, go to
File
>
New Account
.
To display the list of accounts in the database, select
View
>
Start Page
or click on
Start Page
. In this section you can delete
or recall the configuration for a given account as follows:
1. Right click on the account name.
2. Select
Open
to load the data from the database or
Delete
to delete the account and all its settings from the database.
To load an account, you can simply double-click on the account name.
You can also order the list alphabetically or by code by clicking on the header of the column in question.
All settings are available on the following pages. This chapter describes in detail the application's pages.

Depending on your level of access (Normal User, Installer or Level 4 Installer) the settings pages will display differently.