Bentel Security B3G-220, Installation Manual

Page: 5 / 64

220 Series 5
INTRODUCTION
The devices made by 220 Series are GSM communicators which, if no PSTN line is available, send voice and digital alarms by
Quad-Band GPRS (HSPA Dual-Band) to Sur-Gard System
I
,
II
,
III
,
IV
and 5 receivers. The following versions are available.

BGS-220: communicator board with 2G module in plastic housing.

B3G-220: communicator board with 900/1800 MHz 3G module in plastic housing.

BGS-220K: kit including communicator board with 2G module, antenna with 2 m cable, adapter and metal bracket.

B3G-220K/EU: kit including communicator board with 900/1800 MHz 3G module, antenna with 2 m cable, adapter and metal
bracket.
Information relating to specific models is highlighted with reference to the respective code. The term “communicator” refers to
functions shared by all versions. This manual provides instructions for programming and using the communicator. For special
installation requirements, a remote outdoors antenna ANT5-15 with 15 m cable is available.

The communicator may be installed by a qualified technician only and used on in areas with at most Pollution Level 2,
Overvoltage Category II, indoors in a non-danger zone. These instructions must be used in areas together with the panel's
installation manual. Follow all instructions given in this manual to the letter.