Bentel Security ABSOLUTA ABS104M50, User Manual

Page: 33 / 68

ABSOLUTA OPERATIONS FROM LCD KEYPAD 33
LEDs DESCRIPTION
I
OFF All the keypad Partitions are Disarmed.
ON At least one of the keypad Partitions is Armed.
Slow Blinking During the selection of partitions.
a
OFF NO alarms or Tamper active.
ON At least one Alarm or Tamper active.
Slow Blinking All Alarm Partition and Tampers are in memory (restored).
G
OFF When the Keypad's Partitions are disarmed , it signals no info to communicate.
ON When the Keypad's Partitions are disarmed , it signals: Alarms, Tampers, Troubles, Bypassed
Zones, if the Keypad is in Standby Status ; Troubles, in the View Partition Status mode.
When a Keypad's Partitions is armed , this LED is disabled.
Slow Blinking All troubles in memory (restored).
The zone Alarm and Tamper events, signalled on the LEDs, refer to zones which belong to the keypad Partitions.
Table 3 LCD keypad.
INITIAL MODE DESCRIPTION
A
Away The system will turn ON the perimeter and internal zones of the respective Partition.
P
Stay The system will turn ON the perimeter zones of the respective Partition and will leave
the internal zones OFF.
Z
Stay - 0 Delay The system will turn ON the perimeter zones of the respective Partition and will leave
the internal zones OFF, and will remove the Entry Time from zones which have one.
D
Disarm The system will turn OFF the perimeter and internal zones of the respective Partition.
t
Test At least one zone is in Test status for the relative partition.
*
Alarm Partition The corresponding partition is in Alarm Status.
!
Alarm Memory The corresponding partition has an Alarm in memory.
If the partition is selected, the letters will blink.
Table 4 Arming/Disarming Partitions.
ICON SIGN DESCRIPTION
S
X
ON Control panel Tamper (Control panel open or dislodged).
Blinking Control panel Tamper has cleared but at least one Open Panel event in memory.
T
X
ON System Tamper.
Blinking System Tamper has cleared but there is at least one System Tamper event in memory.
b
X
ON Tamper on at least one peripheral device (Keypad, Reader, Expander or Receive.
Blinking Peripheral Tamper has cleared but there is at least one Peripheral Tamper event in memory.
f
X
ON A False Key/Card is present at a Reader.
Blinking At least one False Key/Card event in memory.
s
X
ON A peripheral device (Keypad, Reader, Wireless or Expander) has been disconnected.
Blinking At least one Peripheral Trouble event in memory.
Table 5 Tamper signals.
ICON SIGN DESCRIPTION
t
*
p
OFF Installer Disabled.
ON
Blinking
Installer Enabled.
PIN Transfer Enabled.
r
*
OFF Answerphone facility Disabled.
ON Answerphone facility Enabled.
i
ÿ
OFF Line Free.
ON Line Busy.
Blinking Line Down.
Table 6 Telephone signals.