n
Clear the transmission of events
1.
Enter the Home Screen as described in “Entering
the Home Screen”:
2.
Press
to cancel the transmissions in progress
and any more queuing:
3.
Press
Yes
to confirm.
Viewing Signals
The LED
G
indicates a signal (alarm, tampering, fault
or zone bypass).
If all signals have ended, the LED
G
blinks to indicate
that signals have occurred (memory).
+
If the Keypad has the
EN50131
option enabled, the
G
led ONLY displays system status when ALL
keypad Partitions are disarmed: ask your installer
for more information.
To view signals in progress and those memorised, fol-
low instructions below.
1.
Enter the Home Screen as described in “Entering
the Home Screen”.
2.
Press the icon in the top left on the display; this icon
can be as follows, with decreasing priority:
Ø
fixed, in an alarm;
Ø
fixed, with tampering or fault;
Ø
blinking, with an alarm memorised;
Ø
blinking, with tampering or a fault memorised;
Ø
fixed, with zones bypassed.
The display’s left side shows the signals category:
Alarms, Tampers, Faults and Bypasses; if a category
has no signals in progress or memorised, the relative
key is not displayed; the central part of the display
shows a list of signals for the category selected on the
left side.
3.
Press
Alarms
to view alarms.
14
Expandable Hybrid Control Panel
ABSOLUTA
Summary of Contents for ABSOLUTA ABS104M50
Page 67: ......
