Bentel Security ABSOLUTA ABS104M50, User Manual

Page: 10 / 68

6) Arming/Disarming Keys These keys are to
arm/disarm Partitions: read “Arming/Disarming Parti-
tions” for more information.
+
The Patrol User can ONLY Away Arming and
Disarming the system, therefore these keys are
NOT available to the Patrol User.
7) Auto-arming This icon indicates that auto-arming is
enabled: see “System > Auto-arming” for more information.
Press display/hide the Menu Bar (read “Menu Bar”
for more information):
Press Exit to quit the Home Screen or any other keypad
screen, and go back to step 2.
+
The keypad quits automatically from the Home
Screen (from all other screens) after 30 (180) sec-
onds if no key is pressed.
+
Operations possible and information visible de-
pend on the type of PIN used to log in: Master, Nor-
mal or Limited or Patrol.
+
Operations related to Partitions and Zones will
ONLY be effective on Partitions and Zones of Parti-
tions common to the PIN and Keypad used.
+
Each PIN and Keypad can ONLY display the infor-
mation in Partitions and Zones belonging to Parti-
tions common to the PIN and Keypad used.
n
Failed to access
The following message appears if an invalid PIN is en-
tered:
+
The keypad blocks for 90 seconds if 10 consecu-
tive invalid PIN are entered.
Arming/Disarming Partitions
When a Partition is armed, any violation of one of its
Zones causes an alarm.
When a Partition is disarmed, its zones can be violated
without causing any alarms.
+
The 24h Zones cause an alarm independent of the
status of Partitions they belong to; they are gener-
ally used to detect security system device tamper-
ing and as fire detectors.
Operations described in this paragraph arm/disarm ALL
Partitions common to Keypad and PIN used, as pro-
grammed by the installer (ask the installer for more in-
formation).
Single Partitions can also be armed/disarmed singly as
described in “Info > Partition Status”.
To arm/disarm Partitions, follow the instructions below.
Enter the Home Screen as described in “Entering the
Home Screen”.
The keypad displays the Home Screen described below.
1) Arming Mode Displays Arming Modes available:
Ø
Global , arms all Partitions common to Keypad and
PIN used;
Ø
STAY type A (B/C/D), arms/disarms the Partitions
common to keypad and PIN used as programmed by
the installer.
+
The Global option is NOT displayed if the installer
has not programmed at least one stay arming
(Type A, B,C or D).
+
Labels of Stay Arming Modes can vary based on
installer programming.
+
Any arming mode labels that exceed the space avail-
able scroll automatically to display the excess part:
read “Keypad > Scrolling Test” for more information.
2) Label of Arming Mode selected.
3) Description of Arming Mode selected.
+
Arming Mode descriptions are programmed by the
installer.
10 Expandable Hybrid Control Panel ABSOLUTA