10
890053-03-01
Keypad Parameters
Keypad parameters related to H2 communication board
COM-22 Opt Parameter 13
0
0
Set the network communication
speed. (fixed to 100 Mbps Auto)
E/M
COM-23 Opt Parameter 14
1
0
– 11 CIP Input Instance
E/M
COM-24 Opt Parameter 15
1
0
– 11 CIP Output Instance
E/M
Ref.
After making changes to parameter COM-07 and parameters COM-10
– 24, you must set
COM-94 (Comm-
Update) to “1 (Yes)” to save the changes. If COM-94 [Comm-Update]
has not been set after making the parameter changes, the LED indicator will flash in red at
2-second intervals to warn the user.
Keypad parameters related to H2 communication board
Code
No.
Parameter
Name
Initial
Value
Range
Description
Protocol
COM-30
Para Status
Num
3
0
– 8
Automatically set according
to the CIP Input Instance.
E/M
COM-31 Para Status-1
000A
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-32 Para Status-2
000E
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-33 Para Status-3
000F
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-34 Para Status-4
-
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-35 Para Status-5
-
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-36 Para Status-6
-
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-37 Para Status-7
-
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-38 Para Status-8
-
0x0000
-0xFFFF
Set up the inverter address to
be read by the client. (Hex.)
E/M
COM-50 Para Ctrl Num
2
0
– 8
Automatically set according
to the CIP Output Instance.
E/M
COM-51 Para Control-1
0005
0x0000
Sets up the client’s command
E/M
