BENRUBI CM 6626A, Manual

Page: 23 / 28

24
EN
Εspresso Maker
CM 6626A
• Pour the frothed milk into the cups
containing the espresso coffee.
IMPoRTANT
:
• Never operate the steam/hot water nozzle
for longer than 2 minutes at one time.
• Never allow the milk to boil as this will spoil
the flavor of the coffee.
• To prepare more than one cup of
cappuccino, first make all the espresso
coffees, then at the end prepare the frothed
milk for all the cappuccinos
To Make Espresso After Froting Milk
• If you’re making espresso after frothing milk,
you need to drain any overheated water that
could burn your coffee as following:
• Place a container with at least 30mm depth
of cold water underneath the steam/hot
water nozzle, immerge the nozzle into the
cold water at least 10mm depth. ensuring
the steam button is already released
then turn the steam/hot water knob anti-
clockwise, Press down the coffee/hot water
button and allow the water to flow out from
the steam/hot water nozzle until the ready
light goes out.
• Release the coffee/hot water button to off
position to stop the water flowing from the
steam/hot water nozzle.
• Turn the steam/hot water knob in a
clockwise direction to close.
• The appliance is now ready to make coffee.

NoTE : Don’t raise the nozzle over water
level before finish the operation, to avoid
any risk of scald by steam or hot water
coming out of the steam/hot water nozzle
rapidly.
To boil water for other drinks, tea
e.g.
• Make sure all buttons are in the off position.
• Check that there is water in the tank.
• Press down the On/Off button.
• Position a container under the steam/hot
water nozzle.
• When the ready light glows, turn the steam/
hot water knob in an anti-clockwise direction
then press down the coffee/hot water button,
hot water will come out of the steam nozzle.
• Release the coffee/hot water button to off
position to stop the flow of hot water, then
turn the steam/hot water knob in a clockwise
direction to close.

NoTE :
1. Do not spout hot water from the steam
nozzle for longer than 20 seconds in one
operation.
2. To avoid any risk of scald, you have to
use a handled container with enough
depth, because strong steam and rapid hot
water will come out of the steam/hot water
nozzle, especially at the beginning of the
above step 5.
Cleaning
• Never immerse the cord, plug, or appliance
itself in water or other liquids.
• Always unplug the machine and make sure
cool down before you clean it.
• Don’t wash parts in the dishwasher.
Tank, lid, filter holder
Wash, rinse and allow to dry In order to
prevent filter holder was oxidized, it must be
dry.
Filter (one and two cup version)
• Wash and dry after every use.