BENRUBI CM 6626A, Manual

Page: 20 / 28

21
EN
Εspresso Maker
CM 6626A
Features
1. Powerful pump.
The appliance is equipped with a powerful
15 bar pump capable of producing excellent
espresso and cappuccino.
2. Aluminum boiler.
The appliance is equipped with a thick
aluminium boiler that heats fast and has
excellent steam, hot water capacity.
3. Removable drip tray.
The drip tray is removable for easy cleaning
4. Detachable water tank.
The 1.5L transparent water tank with hinged
lid is detachable for easy cleaning and
refilling.
5. Safety system.
The appliance is equipped with pressure
relief, valve, thermal fuse and dual
thermostat to prevent from overheating and
overpressure.
6. From enhancing function.
The appliance is equipped with a froth-
aid device, enjoy abundant milk froth for
cappuccino within minutes.
Before Using for the First Time
1. Remove all packaging.
2. Wind excess cable around the storage slot
on the bottom of the machine.
3. Wash the parts, please refer to “Cleaning”.
4. Flush the machine through with clean
water, please refer to “Before Making
Espresso for the First Time” as below.
Before Making Espresso for the
First Time
1. Make sure that all buttons are in the “Off”
position and that the steam/ hot water knob
is closed by turning clockwise (don’t over-
tighten).
2. Lift out the tank, draw up the lid and fill with
cold water. Never fill above the marked
level MAX. Alternatively, lift up the lid
and fill the tank whilst in position on the
espresso machine. We recommend using
filtered water as it produces better coffee
and reduces limescale, never use fizzy
water.
3. Refit the tank, make sure that it is correctly
positioned and apply light pressure if
necessary to ensure the valve at the
bottom of the tank connects with the water
inlet of the machine.
It is normal for some water to remain in the
compartment under the tank, this can be
removed using a sponge.
4. Swing out the steam/ hot water nozzle
then attach the filter holder to the machine
by positioning it under the boiler outlet
and turning to the right, place a bowl
underneath.
5. Plug in the mains supply, press down the
On/Off button, then the power light will
glow.
6. Immediately press down the coffee/hot
water button and wait until water drip from
the filter holders. This means the boiler has
been filled with water.

NoTE : You have to operate this step as
soon as possible, otherwise the boiler will
by dry-boiled.