BENRUBI CM 6626A, Manual

Page: 26 / 28

27
EN
Εspresso Maker
CM 6626A
Problem Possible cause Solution
Espresso coffee
does not come out of
the machine.
The coffee is damp.
Pressed the coffee too
firmly into the filter.
The holes in the filter
holder spouts are blocked.
The boiler outlet is
blocked.
The tank is incorrectly
fitted and the valve at the
bottom is not open.
The holes in the crema
device are blocked.
Check that you are using ground coffee
suitable for espresso makers.
Press the coffee more lightly in the filter
and change the grind if necessary.
Clean the holes in the spouts.
Clean the boiler outlet as indicated in the
chapter ‘cleaning’.
Press the tank lightly so as to open the
valve at the bottom.
Dismantle the crema device and clean
parts thoroughly. See ‘Cleaning’.
Espresso coffee
drips from the edges
of the filter holder,
instead of from the
holes.
The filter holder is
incorrectly attached to the
machine.
Some powder remained
on the side of boiler outlet
or the gasket for boiler
outlet.
The holes in the filter
holder spouts are blocked.
The gasket of the
espresso boiler has lost its
elasticity.
Refit the filter holder, making sure it is
located correctly and turn to the right.
Remove the powder from boiler outlet and
the gasket.
Clean the holes in the spouts.
Get the gasket replaced to contact the
nearest authorized service agent
The espresso coffee
is cold
Preheating the machine
was not carried out.
The cups were not
preheated.
The Ready light was not
glowing when starting to
brew coffee.
Follow instructions on ‘preheating the
espresso machine’.
Preheat the cups by rinsing with hot water
or placing on the cup warming tray.
Wait until the Ready light glows before
starting to brew coffee..
The pump is too
noisy.
The water tank is empty.
The tank is incorrectly
fitted and the valve in the
bottom is not open.
Fill the tank with water.
Press the tank lightly so as to open the
valve at the bottom.