
105
Adjustment / Alignment Procedure
1. Preparation :
(1)
Setup input timing SVGA2(
37.879K, 60.317Hz
) & 32-Grays pattern.
(2)
Enter factory OSD.
(3)
Enter the Auto Turn on mode.
(4)
Power off the monitor, then power on again.
(5)
Setup unit and keep it warm up at least 1hour.
(6)
Backlight should set to “
Bright
”.
2. PC Auto Timing Check :
(1) Timing list :
Resolution
Horizontal
Frequency(Khz)
Vertical
Frequency(Hz)
Dot Clock
Frequency(Mhz)
Remark
720×400 31.469
70.08
28.322
DOS,
VESA
640×480 31.469
59.94
25.175
DOS,
VESA
640x480 35.00 67.00
30.24
Mac.(SOG)
640×480 37.5
75.00
31.50 VESA
640x480 37.86 72.81
31.50 VESA
800x600 35.16 56.25
36
VESA
800×600
37.879
60.317
40.00
VESA
800×600 46.88
75.00
49.50 VESA
800×600 48.08
72.19
50
VESA
1024×768 48.363
60.00
65.00 VESA
1024×768 56.5
70
75
VESA
1024×768 60.00
75.00
78.75 VESA
1280x720 44.955 59.939
74.175 VESA
1280×1024 79.976
75.025
135
VESA
1360x768 47.7
60
85.5 VESA
1920x1080
67.5
60
148.5
VESA
(2)
Setup input timing SVGA2(
37.879K, 60.317Hz
) “16-Grays pattern ” pattern.
(3)
Select timing from above timing list.
(4)
If position is wrong, press “Auto Adjustment” function at factory OSD to check this
function
Summary of Contents for V37X
