BenQ SH Series, Quick Start Manual

Page: 5 / 38

Section 1: Quick Start Guide 3
Eng
lish
3.
Select and prepare the installation location
In order to prevent potential dangers and prolong the service life of the
display, please observe the following points when installing, operating and
cleaning the display.
Once all considerations and precautions have been made, position the display
where most suitable.
Do NOT place the display on an uneven, sloping or unstable surface where it
may fall and cause damage to itself or others.
Do NOT place the display near water, like a spa or pool, or in a position which
will allow the splashing or spraying of water onto the display, like in front of
an open window where rain water may enter.
Do NOT place the display near or above sources of heat, such as radiators,
heaters, fuel stoves and other heat-generating items (including audio
amplifiers). Otherwise heat may cause damages to the outer casing as well as
the components inside.
Do NOT place the display in direct sun or where direct sun or spot lighting
will shine onto the display, as the heat may damage the display and the bright
light will make viewing the display more difficult than necessary.
Do NOT cover or block the vents and openings while the display is switched
on, as the heat may accumulate inside the display and result in danger.
Do NOT place the display in an enclosed place without allowing for
ventilation. If wall mounting, allow appropriate space on top for attaching the
display to the wall bracket.
If wall mounting, have a suitable qualified and experienced tradesperson
mount it safely. Ensure that the mounting bracket (optional accessory) is
securely screw fixed to the wall structure, and not just the wall render, lining
or cladding. Do not glue the bracket to the wall. Use only a recommended
display wall bracket for this model display. Ensure the bracket is level
horizontally. The dimensions of the display are detailed in "Dimensions" on
page 29 .
If recessed into a wall opening, you must leave appropriate free space both top
and bottom for mounting and removing the display.
Observe all warnings and cautions as labelled on the display.