BenQ SH Series, Quick Start Manual

Page: 30 / 38

OSD (On-Screen Display) menu 28
Eng
lish
Setup menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference
only.
Item Function Operation Range
Language
Select your desired language for the OSD
menu.
Press
VOL
or
VOL
to change
selection.
• English
•
繁體中文
Backlight
Adjust backlight intensity. If
Auto
is
selected, the ambient light sensor will be
activated and the display’s backlight will
be changed automatically according to
the ambient lighting condition.
• Bright
• Normal
• Dark
• Auto
Sleep
Timer
Set the Sleep Timer to automatically turn
off the display. 1 minute before
shutdown, a message will display on-
screen. At this time, if you wish to cancel
the function, press any button on the
remote control.
Once the time expires, the display will be
put to the standby mode automatically.
0, 30, 60, 90,
120, 150, 180
(minutes)
ECO
Once set to
On
, the display will activate
the Display Power Management System
(DPMS) and enter power saving mode
when no PC input signal is detected for 5
seconds, or enter standby mode
automatically if no Video signal is
detected for 10 minutes.
• Off
• On
HDMI/DVI
Input
Select an input mode according to the
device connected to the HDMI/DVI
input terminal. Select
PC
if a PC is
connected. If a video device (for example,
a DVD player or TV game console) is
connected, select
Video
.
• PC
• Video
Blue
Screen
Once set to
On
, a blue screen will be
displayed when no input signal is
detected, or when the signal is too weak.
• Off
• On
Reset All
Settings
Restore all settings to their default values. Press
INPUT
to activate the
reset.
Language English
Backlight Normal
Sleep Timer 0
ECO Off
HDMI/DVI Input PC
Blue Screen Off
Reset All Settings
Setup