Operation
63
FUNCTION
DESCRIPTION
Standby
Settings
Network
Enable network standby mode
Selecting On enables the function, and the projector can be
monitored or controlled over a network when it is in standby
mode.
Switch to normal standby mode
Sets the timer to switch to normal standby mode.
Microphone
Selecting On enables the function, and the microphone can be
used even in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the COMPUTER 1
and MONITOR-OUT jacks are correctly connected to devices.
See
"Connecting a monitor" on page 23
for how to make the
connection.
Enabling this function slightly increases the
standby power consumption.
The Monitor Out only works when an appropriate
D-Sub input is made to the COMPUTER 1 jack.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
/
to choose the source that you wish to use. See
"Connection" on page 21
for how to make the connection.
Enabling this function slightly increases the
standby power consumption.
Network
Settings
See “BenQ Network Projector Operation Guide” for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: User 1,
User 2, Projector Installation, Color Space
Conversion, High Altitude Mode, Security Settings,
Baud Rate and Network Settings
5. SY
STEM SET
U
P: Advanced
men
u
