![background image](http://html1.mh-extra.com/html/benq/mw724/mw724_user-manual_2734778026.webp)
Connection
26
Connecting an S-Video/composite source device
Examine your Video source device to determine if it has an unused S-Video/
composite output jack available:
• If it has both jacks, use the S-Video output jack for connection as the S-
Video terminal provides better picture quality than the Video terminal.
• If it has either of the output jack, you can also continue with this
procedure.
• If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to an S-Video/Video source device:
1.
Take an S-Video/Video cable and connect one end to the S-Video/Video output
jack of the Video source device.
2.
Connect the other end of the S-Video/Video cable to the S-VIDEO/VIDEO
jack on the projector.
3.
If you wish to make use of the projector speaker(s) in your presentations, take a
suitable audio cable and connect one end of the cable to the audio output jack of
the device, and the other end to the AUDIO (L/R) jack of the projector.
4.
If you wish, you can use another suitable audio cable and connect one end of the
cable to the AUDIO OUT jack of the projector, and the other end to your
external speakers (not supplied).
Once connected, the audio can be controlled by the projector On-Screen
Display (OSD) menus. See
"Audio Settings" on page 61
for details.
The built-in speaker will be muted when the AUDIO OUT jack is connected.
• If the selected video image is not displayed after the projector is turned
on and the correct video source has been selected, check that the Video
source device is turned on and operating correctly. Also check that the
signal cables have been connected correctly.