Operation
33
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase
a lock, such as the Kensington lock, to secure the projector. You can locate a
Kensington lock slot on the rear side of the projector. See item 23 on page
10
for
details.
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer
to the lock's documentation for finding out how to use it.
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the On-
Screen Display (OSD) menu.
WARNING: You will be inconvenienced if you activate the power-on lock
functionality and subsequently forget the password. Print out this manual
(if necessary) and write the password you used in this manual, and keep
the manual in a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the
correct password is entered every time the projector is started.
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security
Settings menu. Press Mode/Enter.
2.
Press to select Change Security Settings and press Mode/Enter.
3.
Enter the new or current password. As
pictured to the right, the four arrow keys ( ,
, , ) respectively represent 4 digits (1,
2, 3, 4). According to the password you
desire to set, press the arrow keys to enter
six digits for the password.
If the function is used for the first time, enter
the default password (1, 1, 1, 1, 1, 1) of the
projector by pressing the arrow key six times.
4.
Confirm the new password by re-entering the new password. Once the
password is set, the OSD menu returns to the Security Settings page.
IMPORTANT: The digits being input will display as asterisks on-screen.
Write your selected password down here in this manual in advance or
right after the password is entered so that it is available to you should you
ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5.
Press to select Power On Lock and select On by pressing
/ .
