![background image](http://html.mh-extra.com/html/benq/ls200-series/ls200-series_user-manual_2733734020.webp)
20 Operating the camera
Engli
sh
Operating the camera
The procedure below is a general guideline for basic operation. It is particularly
useful if you are new to the camera.
1. Press the Power button to turn the power on.
2. Slide the mode switch to
and press
>
,
,
, or
to locate desired options (under two different tabs:
and
), and then
press
or to make selections.
3. Slide to to zoom-in or
to zoom-out.
4. Press the shutter halfway to set automatic focus. Once the focus is set, the
focus frame color will turn from white (unfocused) to yellow-green (focused).
If the focus frame color is red and you press the shutter down, it might result
in a blurred photo.
5. Press the shutter down fully to capture.
6. Release the shutter.
7. Slide the mode switch to
and enter the
Movie Record
mode. Next,
adjust the optical zoom as needed and press the shutter down to start video
recording (press the shutter again to stop video recording).
8. Slide the mode switch to
and view captured images or recorded videos.
You can press
, or to move to different images/videos, slide to press
or
to zoom-in/out a captured image, or slide to
to view 9 images on
the screen.
Remember to follow the on-screen display or slide to
for instructions
(wherever available). Next, press corresponding buttons to access and set more
options. At any time, you can cancel the current operation by pressing
to
return to your previous step.
Optical Zoom
Digital Zoom
LS200 UM - EN.book Page 20 Wednesday, November 30, 2011 10:52 AM