background image

• Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate this equipment.

Safety warning and notice

Before operating the camera, please make sure that you read and fully understand the 
content in this section. If you ignore and violate all safety warning notices indicated in 
this section, the camera warranty may be void. Meanwhile, not only the camera but 
also you and all other people and things around you may be severely damaged, 
injured, or even placed in danger of death.

For your safety

• Keep the camera and its accessories out of the reach of babies, toddlers, and 

children. In particular, small parts such as memory cards and batteries could be 
easily dismantled and swallowed by them.

• Use only the original accessories to avoid possible risks to health and property, and 

thus meet all related legal regulations.

• Do not dismantle the camera under any circumstances.
• When using the flash, do not go too close to human eyes (particularly for babies, 

toddlers, and children) or animal eyes. Otherwise, when the flash fires, the light 
may cause damage to human eyes or irritate animals.

• Batteries could explode, for instance. All batteries can cause property damage, 

injury or burns if a conductive material such as jewelry, keys or beaded chains 
touch exposed terminals. The material may complete an electrical circuit and 
become quite hot. Exercise care in handling any batteries, particularly when placing 
it inside your pocket, purse, or other container with metal objects. Do not dispose 
of batteries in fire as they may explode.

• To prevent electric shock, do not attempt to disassemble or repair your camera by 

yourself.

• Some camera models accept non-rechargeable batteries. When using these 

batteries, do not charge them. Otherwise, dangers such as explosion and fire may 
occur.

• Risk of explosion if battery is replaced by an incorrect type. Dispose of used 

batteries according to the instructions.

LS200 UM - EN.book  Page 5  Wednesday, November 30, 2011  10:52 AM

Summary of Contents for LS200 Series



































































Reviews: