![background image](http://html.mh-extra.com/html/benq/ls200-series/ls200-series_user-manual_2733734016.webp)
16 Preparing the camera for use
Engli
sh
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera
before removing the battery.
• It is normal for the camera to become warm during operation, because the
camera casing might conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology,
and more than 99.99% of the pixels on the LCD display meet standard
specifications. Yet, it is possible that less than 0.01% of the pixels on the LCD
display may have some light spots or show unusual colors. This is normal and does
not indicate display malfunction, nor will this affect the pictures you take with the
camera.
• The LCD monitor looks darker in strong sunlight or bright light. This is not a
malfunction.
• To prevent your images from being blurred while pressing the shutter button,
always hold the camera steady. This is especially important when you are shooting
under low lighting conditions, under which your camera may reduce the shutter
speed to ensure your images are properly exposed.
A
To install the battery:
1. Release and open the battery/card cover (A).
2. Insert the battery in the correct direction by
matching the + - label on the battery slot (B).
3. Push the battery all the way down.
4. Close and lock the battery/card cover (D).
B
C
To remove the battery:
1. Release and open the battery/card cover (C).
2. Pull the battery out.
3. Close and lock the battery/card cover (D).
D
LS200 UM - EN.book Page 16 Wednesday, November 30, 2011 10:52 AM