![background image](http://html1.mh-extra.com/html/benq/joybook-lite-u101-series/joybook-lite-u101-series_user-manual_2733869046.webp)
Recovering your system using QDataTrove
42
Should your system become unstable or encounter unexpected
loss of data, you can then try to restore your system drive to its
previous state from a list of restore points.
For more information about System Protection, refer to
Help
and Support
on Windows XP.
QDataTrove allows you to access
Backup and Restore
Center
on Windows XP, and manually create a restore point
whenever needed. To perform the operation, follow the steps
below:
1. In QDataTrove, click the
Back up
tab.
2. Click the
button to select
Create a Restore Point
.
3. On Windows XP, to create a restore point manually, key in
the description of the restore point and follow the remaining
on-screen instruction to add a new restore point.
Restoring your system
The Restore feature helps to bring your Joybook Lite back to its
factory default settings or to an earlier state. In order to restore,
you need to back up your system drive, or create a restore point
first.
Should your system become unstable or damaged, try to recover
your system with the restore solutions provided in this
functional module.
Restoring your system to factory default settings
QDataTrove allows you to restore your system drive (C: drive) to
the factory default configuration.
1. In QDataTrove, click the
Restore
tab.
2. Click the
button to select F
ull System Restore -
Factory Default Settings
.
3. A dialog box asking whether you wish to adjust the size of
disk partition appears.
• If you select "Yes", all programs you installed or data you
saved on both the C: drive and the D: drive will be erased.
• If you select "No", all programs you installed or data you saved
on the C: drive will be erased. However, data on the D: drive
will not be affected.
4. Follow the remaining on-screen instructions to complete the
operation.
Restoring your system to your own backup
system image
QDataTrove allows you to restore your system drive (C: drive) to
a previous state with your own backup system image.
To perform this operation, a backup system image file is
required. For details about making your own backup system
image, refer to
"Backing up your system into a single file" on
page 41
or
"Backing up your system into a disc" on page 41
.
1. In QDataTrove, click the
Restore
tab.
2. Click the
button to select
Full System Restore -
Backup Image
.
3. A Open dialog box appears. Browse to select a backup system
image, and then click
Open
.
4. A confirmation message appears. To proceed with the
operation, click
Yes
.
5. Follow the remaining on-screen instructions to complete the
operation.