BENNING MA 4 measuring adapter
20
8. Technical data
Nominal voltage
3*400 V ±10 %; 50 Hz
– 60 Hz
Current carrying capacity
32 A three-phase current
Power consumption
“Mains active” 7 VA, cos φ ~ 0.4
Protection class
Protection class I acc. to: EN /
IEC 61010-1, VDE 0411-1
Measuring category
II
Contamination level
2
EMC
EN 61326-1
Measuring range
0.08 mA ... 10.0 mA AC
Current accuracy
4 % of the measured value
±40
μA
Measuring accuracy
6 % of the measured value
±60
μA
Fault current source for
the tester
N (differential current measuring
method),
PE (1
kΩ measuring resistance)
Current source range
0.08 mA ... 10.0 mA AC
Ambient conditions:
Altitudes of up to 2000 m above
sea level
Temperature range:
Operating temperature
Storage temperature
0.0 °C to 35.0 °C
-20.0 °C to 60.0 °C
Max. relative humidity:
linearly decreasing
non-condensing
80.0 % at 30.0 °C
60.0 % at 40.0 °C
Protection category
IP 40 with the case being open
IP 67 with the case being closed
Dimensions
H x W x D
[mm]
170 x 410 x 350
Weight
4.2 kg
9. Maintenance
Designation
Part no.
Measuring adapter
044162
The measuring adapter does not require any special mainte-
nance. Please make sure that the surface near the connector
contacts is clean and dry. For cleaning, use a slightly moistened
cloth. Do not use any cleaning agents, abrasives or solvents.
10. Optional accessories
Figure
Designation
Item no.
Adapter cable for the MA 4
16 A / 400 V CEE connector
–
32 A / 400 V CEE coupling,
Length: 1 m
044163
11. Warranty terms
The measuring adapter is subject to strict quality control. In case
of faults with regard to correct functioning, we grant a manufac-
turer’s warranty of 24 months. Manufacturing faults or material
defects shall be eliminated by us free of charge as far as the de-
vice shows malfunction without external influence and is returned
to us without having been opened. Damages caused by falling or
incorrect use are excluded from warranty.
