24
Memorising new transmitters (RADI>PP)
To memorise new transmitters with Step-by-Step function for the automation command, proceed as follows:
1
Press the [PGM] button to access programming or if the control unit is already in the programming menu, press [
] until the Radi menu
is displayed.
PMOT
Radi
2
Press the [PGM] button to enter the Radi function.
The display shows the first sub-menu PP.
PP
3
Press the [PGM] button to enter the PP function.
The display shows the PUSH message.
Push
4
Press the BY transmitter button that is to be associated to the Step-by-Step function within 5 seconds.
5
The display shows PRG to confirm memorisation.
PRG
6
The control unit goes back to the RADI>PP menu. To go back to the RADI menu, press the [PGM] and [
] buttons at the same time. To exit
programming, press the [PGM] and [
] buttons at the same time again or, alternatively, remove the power supply or wait 60 seconds.
PGM+
Memorising pedestrian function (RADI>Ped)
The pedestrian function can be associated to any transmitter button. The pedestrian function envisions partial opening for 7 seconds, proceed as follows:
1
Press the [PGM] button to access programming or if the control unit is already in the programming menu, press [
] until the Radi menu
is displayed.
PMOT
Radi
2
Press the [PGM] button to enter the Radi function.
The display shows the first sub-menu PP.
Press [
] to display the Ped sub-menu.
Ped
3
Press the [PGM] button to enter the Ped function.
The display shows the flashing PUSH message.
Push
4
Press the BY transmitter button that is to be associated to the Pedestrian function within 10 seconds (e.g. if key 1 has already been
associated to the Step-by-Step function, key T2 can be associated to the Pedestrian function).
5
The display shows OK to confirm memorisation.
ok
6
The control unit goes back to the RADI>PED menu. To go back to the RADI menu, press the [PGM] and [
] buttons at the same time. To
exit programming, press the [PGM] and [
] buttons again at the same time again or, alternatively, remove the power supply or wait 60
seconds.
PGM+
Deleting transmitters (RADI>CLR)
Proceed as follows to delete a transmitter already inserted in the memory:
1
Press the [PGM] button to access programming or if the control unit is already in the programming menu, press [
] until the Radi menu
is displayed.
PMOT
Radi
2
Press the [PGM] button to enter the Radi function.
The display shows the first sub-menu PP.
Press [
] to display the CLR sub-menu
Clr
3
Press the [PGM] button to enter the CLR function.
The display shows PUSH.
Push
4
Press any transmitter button BY that is to be deleted within 5 s.
5
The display shows OK to confirm cancellation.
OK
6
The control unit goes back to the RADI>CLR menu. To go back to the RADI menu, press the [PGM] and [
] buttons at the same time. To
exit programming, press the [PGM] and [
] buttons again at the same time again or, alternatively, remove the power supply or wait 60
seconds.
PGM+
Summary of Contents for 9592170
Page 2: ......
