o Regularly check the tubing inside the peristaltic pump. Replace this hose immediately in
case of leakage. It is advisable to replace this hose every 2 years as a precaution.
o Regularly check the pH injection nipples for leaks. Replace these nipples immediately in
case of leakage.
o Check the power supply and cable connection regularly. If the pump begins to operate
abnormally, turn it off and call a qualified technician.
General visual condition
Clear, free of algae and sediment
Temperature
Higher than 15° C
pH
Between 7.2 and 7.6
Level of stabikisator (cyanic acid)
Below 40 ppm (mg/L)
Alkalinity
Between 80 ppm and 120 ppm
Hydrometric titer (TH)
Below 60 °F
Recommended salinity (for chlorinator)
2-2.5 kg/m³ for LOW SALT equipment
Concentration of free chlorine
Between 0.5 and 1.5 ppm
Warnings
○ Improper installation can create an electrical or chemical hazard, which can result in
serious injury.
○ Never mix acid and liquid chlorine.
○ Keep the installation and chemicals out of the reach of children. Always wear safety gloves
and safety glasses when working on the installation.
○ Switch off the power supply
○ NEVER make any adjustments inside the dispensing equipment.
○ If you are not familiar with the pool filter system and dosing equipment:
- read the entire installation and operating instructions before using the dosing equipment;
never modify anything without consulting your supplier, professional pool contractor.
