59
Electricity
7
Shore supply
Before connecting or disconnecting the boat/shore supply cable,
make sure the cut-out switch that connects the shore supply is
turned off.
Connect the boat/shore supply cable in the boat before connec-
ting to the socket on the shore.
Disconnect the boat/shore supply cable from the shore end
fi
rst.
Close the cover to the socket on the shore.
GENERATOR (OPTION)
The generator is located in the centre cockpit locker.
Its purpose is to supply power to the batteries by means of char-
gers, and provide the 110 V - 220 V on-board supply.
The generator is fuelled from the port tank.
The generator is started either using the control on the generator
itself or the generator control on the electrical panel.
Before operating the generator:
- Turn the two battery switches on the electrical panel to the
“ON” position (If the batteries cannot be powered up from the
electrical panel, make the connections using the push buttons in
the centre cockpit locker).
- Open the fuel valve (access beneath centre passageway compa-
nionway steps).
- Open the seawater cooling seacock (in machinery space) and
the gas/water separator drainage seacock (accessed via port aft
cockpit locker).
- Set the 110 V - 220 V supply to the GENERATOR position on
the electrical panel.
Please refer to the user manual provided for information on using
and maintaining the generator.
110 V - 220 V Circuit
danger
Never let the boat/shore supply cable hang
in the water:
It can result in an electrical
fi
eld capable of
injuring or killing nearby swimmers.
danger
Never work on an 110 V – 220 V electrical
installation when the shore supply is connec-
ted.
The various electrical
fi
ttings working on 110 V - 220 V have their
switches grouped together on their own electrical panel.
As far as possible use double-insulated or three-wire (Neutral-
Live-Earth) electrical equipment.
Connect
fi
tted metal electrical equipment casings or boxes to the
vessel’s protection wiring (green wire with yellow bands).
In the event of a problem or for any modi
fi
cation to the circuit, call
in a quali
fi
ed marine electrical professional.
Summary of Contents for Swift Trawler
