![background image](http://html1.mh-extra.com/html/lowell/downeast-36/downeast-36_instructions_1942566001.webp)
LOWELL DOWNEAST 36
LOBSTER BOAT
Sail Classics, Inc.
P.O.Box 747 Lakebay, WA 98349
Phone: 253-884-2267 Fax: 253-884-7858
Instructions:
Follow these instructions carefully and step by step. When taking the model out of the box, be
careful to take the hull out together with the Styrofoam.
1.
Unwrap the hull and stand. Place the hull on the stand.
2.
Unpack all of the small parts which will be used in assembly.
3.
Find the black pipe and insert it through the hole in the top of the cabin, down through the
bulkhead top until it stops.
4.
Insert the brass davit with snatch block into the brass holder attached to the starboard side
cabin. This stops in a wooden piece on the deck.
5.
There are two lobster traps included with your model. Find the trap with the line attached.
Lead the line through the snatch block, then down around the brass drum winch several times
and then tie this off on the brass cleat next to the winch.
6.
Peel off the tape on the bottom of the lobster trap and place the trap onto the rail.
7.
The other lobster trap and barrels can be placed at any location of your choice.
Your Sail Classics model should now be complete. Enjoy!