BENETEAU ANTARES 36 Owner'S Manual Download Page 164

Page: 164 / 184

164

197855 RCD-2

Index B

Maintenance

- once a year, dismantle, carefully wash and grease all the moving parts of the windlass.

- Regularly grease the supply terminals of the electric motor of the windlass and of the relay control box.

Emergency anchoring procedure

In the event of an electrical fault, it is possible to lower the anchor manually: Put the handle in the space provided for this
to release the chain grab. Then let the chain run out using the handle to control its speed as it runs.

The handle serves only to release the chain

grab in order to lower the anchor manually
should the electric windlass break down.

The handle cannot be used to raise the anchor

manually.

- Before anchoring check the depth of water,

the power of the current and the nature of the
sea bed.

- Check the swinging area once the boat is at

anchor.

- After each trip rinse the windlass and anchor

chain or rode with fresh water.

Deck fittings

Summary of Contents for ANTARES 36

























































































































































































Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands

BENETEAU ANTARES 36, Owner'S Manual

Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands