BENETEAU ANTARES 36 Owner'S Manual Download Page 44

Page: 44 / 184

197855 RCD-2

Index B

6.1 PROPULSION ENGINES AND OTHER FUEL-BURNING EQUIPMENT

Note concerning the boat's tender:

- If the tender is fitted with a more powerful outboard motor than 25 Kw, it must have on board a portable extinguisher with a rating equal to or greater than 8A / 68B.

- Place for storing the petrol tank of the tender: on deck.

6.2 ELECTRICAL SYSTEM

6.3 GAS SYSTEM

The risks associated with motorisation are described in the ENGINE chapter

The risks associated with other fuel-burning equipment are described in the EQUIPMENT OTHER THAN FOR PROPULSION, WHITH BURNS FUEL chapter

The risks associated with the electrical systems are described in the ELECTRICITY chapter

The risks associated with the gas system are described in the GAS chapter

Information relating to fire risks and risks of explosion

Summary of Contents for ANTARES 36

























































































































































































Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands

BENETEAU ANTARES 36, Owner'S Manual

Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands