BENETEAU ANTARES 36 Owner'S Manual Download Page 115

Page: 115 / 184

197855 RCD-2
Index B

115

12.5 MAIN PLUMBING EQUIPMENT

12.5.1 Water unit

- The water unit is supplied by direct current.

- It serves to feed all the boat's plumbing equipment with fresh water. It is fitted with a pressure switch that activates the flow when the pressure in the water system falls.

- The water unit must only be used with the fresh water supply. All other use (with sea water or bilge water, with oil products) is prohibited.

- The water pump is switched on at the helm station.

- Make sure that the water unit is never run dry.

- The pressure and capacity of the water unit depend on the temperature of the stored fresh water supply.

Control: Steering station

Location: Aft cabin

1. Filter

2. Water unit

3. Expansion tank

Wate

r sys

Summary of Contents for ANTARES 36

























































































































































































Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands

BENETEAU ANTARES 36, Owner'S Manual

Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands