BENETEAU ANTARES 36 Owner'S Manual Download Page 145

Page: 145 / 184

197855 RCD-2
Index B

145

13.12 STUFFING BOX

- The stern gland keeps the propeller shaft watertight.

- The stern gland is accessible through the engine compartment.

- Grease the watertight joint every 200 engine hours (or at least once a year). Apply grease as recommended by the
mechanic.

- The stern gland is lubricated directly by the engine cooling water/by a sea water supply valve.

- After launching the boat, drive the air out from the sleeve pinching it with your fingers.

13.13 PROPELLER

- The propeller delivered with the boat represents the end result of trials carried out in collaboration with the engine
manufacturer. Never change the propeller without first consulting a professional engineer.

- Propeller efficiency will drop if the propeller blades are damaged in any way or dirty: regularly clean the blades carefully.

- During a lift-out, check the propellor: it should turn freely on its axis and there should be no play.

- Boats with twin engines are equipped with counter-rotating propellers.

1. Seawater supply valve

2. Stuffing box

- Respect speed limits..

Engine

Summary of Contents for ANTARES 36

























































































































































































Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands

BENETEAU ANTARES 36, Owner'S Manual

Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands