Benelli TnT1130, Workshop Manual

Page: 390 / 392

UK
390
MF13
10.8 INSTRUCTIONS TO ADJOURN THE GEARCASE
SOFTWARE WITH THE AXONE
NOTE:
During update of the control unit software connect also the second
diagnosics connector (to two poles).
SCREENS SYMBOL
Self-diagnosis screen Press Enter
Benelli screen Press Enter
TnT screen Press Enter
Displacement 1130 Press Enter
Injection screen Select
With the UP and Down arrows select the reprogramming line
Reprogramming Screen Press Enter
Frame code screen Press Enter
Sagem Screen Press Enter
Components position screen Press Enter
Cables connection screen Press Enter
Turn the key in the ON position screen Press Enter
Gearcase data screen Press Plus or Minus
With the o – go in the selection Gearcase
Selection gearcase screen Select
Select with the Up and Down arrows the gearcase type
Selected gearcase screen Press Enter
Starting the gearcase reprogramming (waiting time about 6 min.) the
temperature needle moves until reaching the lower scale on the Axone
display you will read a value which goes from 0% to 100% showing the
programming residual time. When the 100% index is reached, on the
display appears the writing programming well-done.
Well-done programming screen Press Enter
When you press Enter with programming screen well- done, you hear the
fuel pump loading. Turn the key in OFF and you will hear a Relay
clicking in the battery area. Now you can switch off the Axone.