UK
346
MF13
Braking power insufficient
Disks dirty
Clean
Air bubble in hydraulic circuit
Purge
Losses in the hydraulic circuit
Repair
Clamp seals damaged
Change
Pump seals damaged
Change
Clamp pistons do not run freely
Check
Hydraulic liquid low
Refill
Brake disks distorted
Change
Pads dragging on brake disks
Pad springs damaged
Change
Brake disks distorted
Change
Clamp pistons do not run freely
Check
Hydraulic liquid level too high
Adjust
Brake pads worn out
Change
EXHAUST PLANT
Exhaust noise excessive
Exhaust pipe damaged
Change
Fixing pipe loosened
Tighten
Poor engine performance
Exhaust pipe damaged
Change
Fixing pipe loosened
Tighten
COOLING PLANT
Engine temperature too high
Cooling liquid level too low
Refill
Defective cooling fanwheels
Change
Expansion tank cooling liquid cap defective
Change
Electric fan therrmo-switch defective
Change
Sensor temperature instrument defective
Change
Thermostat blocked closed
Change
Cooler fins folded or choked
Repair/clean
Coolers encrusted
Clean
Water pump damaged
Change
Injection/ignition plant defective
Check
Fuel not suitable
Change
Engine cooling circuit defective
Check
Sparking-plug thermal grade not suitable
Change
Accumulation of carbon residues in the head/piston Clean
Engine temperature too low
Thermostat blocked open
Change
Summary of Contents for TnT1130
