Benelli TnT1130, Workshop Manual

Page: 354 / 392

UK
354
MF13
- Charge at room temperature; if the tool has been exposed to
the sun in summer or in a cold place in winter, wait that the
room temperature is reached (approx. 20°C) before beginning
to charge.
Programs check battery charge while running and warn you by
flashing the battery icon when power is low. After this the control
software allows you to use the instrument for about 10 minutes
more and then proceeds with auto-shut down.
This function is disabled only when the maximum computing
power of the processor is required for instance during fast data
acquisition, in such cases the operator is not warned that the
battey is almost depleted.
AUTOMATIC RESET INTERNAL FUSES
AXONE2000 BENELLI is equipped with automatic reset
protection fuses. Sometimes, the reset is not immediate and it
may be necessary to wait for a few minutes.
10.3.3.9 TECHNICAL SPECIFICATIONS
The following technical characteristics refer to the use of the
AXONE2000 BENELLI CPU, those relating to the various
programs and the associated interface modules are available in
the specific section of each kit.
- Self-powered portable computer.
- Graphic display with adjustable brightness and contrast (back-
lit), resolution 320 x 200, brightness can be adjusted by
keypad.
- Plastic-foil keypad with touch keys.
- Internal and external power supply and automatic charge at
12-15 V DC.
Internal power supply with fully charged battery > 2h
- Three standard RS232 serial communication ports.
- Standard parallel communication port.
- External software on memory card.
- Possible connection to hard disk.
- Standard ATA/FLASH PC-CARD drive.
- Possible connection to modem or remote terminal.
- Size: 310 x 140 x 60 mm
- Weight: 1,5 kg
- Consumption: 10W.
- Working temperature range: -5°C + 40°C