Benelli BN302, Owner'S Manual

Page: 103 / 314

101
EN
MAINTEN
ANCE
CLUTCH BACKLASH ADJUST-
MENT
The clutch lever backlash needs to be
10-0-15.0 mm as shown in the igure.
1) Loosen the clutch ring nut “A” and the
clutch screw “C” on the cable, at the
same time.
2) To increase clutch lever backlash,
turn the clutch screw “C” clockwise
(seen from sitting on the bike).
To reduce the clutch lever backlash,
turn the clutch screw “C” anticlock-
wise (seen from sitting on the bike).
3) After adjusting, tighten the clutch ring
nut “A”.
SPARK PLUG INSPECTION
Since the spark plug replacement and
check may be dificult for an operator
with little experience, we recommend
contacting an authorised Benelli work-
shop.
10.0-15.0 mm
A C
CHANGING COOLANT
Change cooling luid at the intervals
speciic in the periodical maintenance
and lubrication sheet. Have the coolant
changed by an Authorised
Benelli Deal-
er.
IMPORTANT NOTICE:
Never try to remove the radiator cap
when the engine is hot.
Check the clutch lever backlash regular-
ly and adjust as necessary: