BendPak PL-14000 Installation And Operation Manual Download Page 5

Page: 5 / 64

INSTALLER / OPERATOR

PLEASE READ AND FULLY

UNDERSTAND. BY PROCEEDING

YOU AGREE TO THE FOLLOWING.

I have visually inspected the site where the lift is to be

installed and verified the concrete to be in good condition
and free of cracks or other defects. I understand that install-
ing a lift on cracked or defective concrete could cause lift
failure resulting in personal injury or death.

I understand that a level floor is required for proper

installation and level lifting.

I understand that I am responsible if my floor is of ques-

tionable slope and that I will be responsible for all charges
related to pouring a new level concrete slab if required and
any charges.

I understand that BendPak lifts are supplied with

concrete fasteners meeting the criteria of the American
National Standard “Automotive Lifts - Safety Requirements
for Construction, Testing, and Validation” ANSI/ALI ALCTV-
2011, and that I will be responsible for all charges related
to any special, regional, structural, and/or seismic anchor-
ing requirements specified by any other agencies and/or
codes such as the Uniform Building Code (UBC) and/or
International Building Code (IBC).

I will assume full responsibility for the concrete floor and

condition thereof, now or later, where the above equipment
model is to be installed. Failure to follow Danger, Warning,
and Caution instructions may lead to serious personal injury
or death to operator or bystander or damage to property.

I understand that BendPak lifts are designed to be

installed in indoor locations. Contact factory for outdoor
use requirements. Failure to follow installation instructions
may lead to serious personal injury or death to operator or
bystander or damage

to property or lift.

Failure

to follow

Danger, Warning, and Caution instructions may lead to

serious personal injury or death to operator or bystander

or damage to property.

Please read the entire manual prior to installation.

Do not operate this machine until you have read and

have understood all of the Danger, Warning and Caution

alerts in this manual. For additional copies

or further information, contact:

BendPak Inc.

1645 Lemonwood Dr.

Santa Paula, CA. 93060

1-805-933-9970

www.bendpak.com

INSTALLER / OPERATOR

PROTECTIVE EQUIPMENT

Personal protective equipment helps makes installation and
operation safer, however, it does not take the place of safe
operating practices. Always wear durable work clothing
during any installation and/or service activity. Shop aprons
or shop coats may also be worn, however loose-fitting
clothing should be avoided.

Tight-fitting leather gloves are recommended to protect
the technician’s hands when handling parts. Sturdy leather
steel-toe work shoes and oil resistant soles should be used
by all service personnel to help prevent injury during typical
installation and operation activities.

Eye protection is essential during installa-
tion and operation activities. Safety glasses
with side shields, goggles, or face shields
are acceptable. Back belts provide support
during lifting activities and are also helpful in
providing worker protection. Consideration
should also be given to the use of hearing protection if
service activity is performed in an enclosed area, or if noise
levels are high.

THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED

COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OR YOURSELF AND OTHERS

AND CAN CAUSE PERSONAL INJURY OR DEATH. READ AND FOLLOW ALL INSTRUCTIONS IN

THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE.