BendPak PL-14000, Installation And Operation Manual

Page: 2 / 64

2
14,000 & 18,000 POUND CAPACITY AUTO STACKER PARKING LIFTS
This instruction manual has been prepared especially for you.
Your new lift is the product of over 40 years of continuous research, testing and development;
it is the most technically advanced lift on the market today.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION & OPERATION BEGINS.
RECORD HERE THE LIFT AND
POWER UNIT INFORMATION WHICH IS LOCATED ON
THE SERIAL NUMBER
DATA PLATES ON THE LIFT AND
ON THE POWER UNIT
Power Unit Model # _____________________
Power Unit Date Of Mfg. _____________________
Power Unit Serial #
_____________________
Max Operating Pressure PL-14,000 2,500 PSI
PL-14000XL 2,500 PSI
PL-18000
2,500 PSI
This information is required when
calling for parts or warranty issues.
PRODUCT WARRANTY
Our comprehensive product warranty means more than a commitment to you; it’s also a commitment to the value of your new
BendPak lift. For full warranty details and to register your new lift contact your nearest BendPak dealer or visit
http:/ / www.bendpak.com/ support/ warranty/
NOTE:
Every effort has been taken to ensure complete and accurate instructions have been included in this manual, however, possible product
updates, revisions and or changes may have occurred since this printing. BendPak Ranger reserves the right to change specifications
without incurring any obligation for equipment previously or subsequently sold. Not responsible for typographical errors.
Warranty void if data plate is removed.
made in CHina
MT20
Model Number Lifting Capacity Serial Number
Date of Manufacture Power Unit Number Volt. / Ph. / Freq. / Amp.
Description Rolling Jack Max. Air Pressure Max.
Cable Dia. Conn. Dia. Cable Lengths
DANGER!
disconnect power
Before servicing.
A C
B D
santa paula, Ca Usa
www.bendpak.com