LR-60/60P Low-Rise Scissor Lifts
32
P/N 5900337 — Rev. F — December 2020
Moving the LR-60P
The LR-60
P
is portable; you can move it between locations as needed. The LR-60 is
not
portable.
⚠
DANGER
Do
not
move the Lift or perform any maintenance to the Lift without first confirming
that electrical power has been disconnected and cannot be re-energized.
The following drawing show the components used to move the Lift.
To move the Lift
:
1.
Make sure the Lift is fully lowered, then disconnect the Power Unit from the Hydraulic Hose using
the Quick-Connect Fittings.
⚠
WARNING
Do
not
attempt to connect or disconnect the Hydraulic Hoses while equipment is
loaded or while the Hydraulic System is under pressure.
2.
Pull up the Wheel Assembly Handle and flip down the Wheel Pin.
3.
Using the Tow Cart, hook the Tow Pin into the Latch near the bottom of the Frame.
4.
Using a downward force, push the Tow Cart to raise the Lift onto its rear wheels, and then carefully
move the Lift to the desired location.
5.
Remove the Tow Cart and lower the Wheel Assemblies.
Summary of Contents for LR-60
