LR-60/60P Low-Rise Scissor Lifts
22
P/N 5900337 — Rev. F — December 2020
About Thread Sealants
Your Lift comes with a bottle of Liquid Thread Sealant.
Thread Sealant lubricates and fills the gaps between the Fitting threads, and leaves no residue that
could contaminate the Hydraulic Fluid. Other types of sealants can shred during installation or removal
and eventually enter the Hydraulic System.
To apply Thread Sealant
:
1.
Make sure the Fittings and connectors you are going to use are clean and dry.
If you are adding Thread Sealant to a Fitting or connector that has already been used with a
different sealant, use a wire brush to thoroughly remove the old sealant before adding more.
2.
Apply a small amount of Thread Sealant to the first four threads of the Fitting.
⚠
WARNING
Make sure to wear the proper protective equipment when handling Thread Sealant.
You only need a small amount because the sealant spreads to the other threads as it is tightened
into place.
If you put too much, the excess liquid will be pushed out when the Fitting is tightened; use a rag to
wipe the excess.
3.
Tighten the Fitting into the connector; do
not
over tighten the Fitting.
4.
Allow the manufacturer-recommended curing time before pressurizing the system.
Summary of Contents for LR-60
